lavo

Guides / Nylon / Maytag Commercial MHN33PD M-Series Front Load Washer

How to wash nylon in the Maytag Commercial MHN33PD M-Series Front Load Washer

To wash nylon on a Maytag Commercial MHN33PD M-Series Front Load Washer, select the Delicates programme at 20C with a 600 rpm spin, add a suitable detergent and start the cycle. Nylon weakens and can shine or scorch under high heat. Wash cool on a synthetics cycle and air dry rather than tumble hot.

Last updated October 2026

Programme
Delicates
Temperature
20°C
Spin
600 rpm
Wash type
Delicates
About
0:22

On the machine

  1. Turn the cycle keypads (POWER WASH upper left, DELICATES upper right, neither pressed for Normal) to Delicates.
  2. Set the temperature to 20°C (TEMPERATURE keypad on the lower left (its neighbour EXTRA RINSE adds rinses if you have used extra detergent)).
  3. Set the spin to 600 rpm (spin setting the machine's owner programmed in setup mode, there is no spin keypad to press (factory preset 800)).
  4. Add a suitable detergent and press your cycle keypad after paying the vend price.

Why these settings

Nylon weakens and can shine or scorch under high heat. Wash cool on a synthetics cycle and air dry rather than tumble hot.

Nylon is strong but heat sensitive, wash cool and avoid high spin to protect the fibres.

Common questions

What temperature should I wash nylon at on a Maytag Commercial MHN33PD M-Series Front Load Washer?

Wash nylon at 20C using the Delicates programme on the Maytag Commercial MHN33PD M-Series Front Load Washer. Nylon weakens and can shine or scorch under high heat.

What spin speed is safe for nylon?

Use 600 rpm. A gentler spin removes enough water without stressing the fibres. Wash cool on a synthetics cycle and air dry rather than tumble hot.

Do I need the care label to wash nylon?

No. Lavo identifies the fabric and condition from a photo of the garment itself and gives the exact setting for your Maytag Commercial MHN33PD M-Series Front Load Washer, even when the care label is faded, cut out, or missing.

What happens if I wash nylon too hot?

Nylon weakens and can shine or scorch under high heat. That is why the safe setting here is 20C on the Delicates programme.

Nylon on other machines

Other fabrics on the Maytag Commercial MHN33PD M-Series Front Load Washer

Get Lavo to scan the garment itself and get this for your own machine.